Get a quote on a Wikus bandsaw blade

Get a quote on Special taps and endmills

Geometric® Chasers on clearance

Get in touch with us
Phone: 203-753-5121

Fax: 203-755-9011

Toll-free: 800-992-3233

Email us:

Hours: 8am - 5pm EST

Guhring Tool Reconditioning
Guhring Tool Reconditioning - 5/18/2018 10:02:13 AM
Utilizing the same high-precision CNC grinding machines that are used in Guhring’s manufacturing plants, their Reconditioning Division is well equipped to restore standard and special tooling to its original factory quality, condition and performance. Whether it’s carbide, PCD, step drills, high volume high speed steel, and cobalt drills, plus many more. High precision remanufacturing delivers longer reground tool life and often more regrinds per tool, resulting in significant cost savings in terms of both tooling and machining expenses. Guhring recommends that all reconditioned tools be recoated with their original protective surface treatment. Their in-house PVD coatings chambers can provide quick and reliable coating services on all reconditioned tooling. Guhring is able to provide factory reconditioning for their tooling as well as their competitors’, fast and efficiently due to the four reconditioning plants located around the country. Contact Danco for more information on this Tool Reconditioning program 1-800-992-3233.

Porta-King Building Systems - 4/23/2018 11:04:32 AM
Prefabricated entry vestibules add an additional layer of security to your building’s entrances. Any place where security is a concern Porta-King vestibules will make a difference.This includes factories, warehouses, schools, churches and more. The structural steel design includes a welded tube framework to create an aesthetically pleasing, super strong, weather tight enclosure. Fully glazed walls allow in plenty of natural light while providing high visibility inside and out for increased safety. Standard glazing is clear tempered safety glass, but other options are available. Interior lighting options include motion sensor activated, dusk-to-dawn lighting, and more for increased visibility at night. Exterior lighting can also be added to light the surrounding area. Optional high security locks can be installed for additional security or prepped to receive on-site installation of key pads or card readers for controlled access. Contact Danco today for more information on Porta-King Building Systems. 1-800-992-3233

Kennedy Versa Series
KENNEDY MFG - 3/27/2018 10:55:28 AM
The Kennedy Versa Series with its many options brings the maintenance department to the floor. Mount a vise, bench grinder, drill press, or other similar tools to the 11 gauge worktop. Packed with security features and built with the thickest gauge steel used in the industrial tool storage market. Look to Versa-Bench to add flexibility, security, and mobility to your MRO. The Versa-Bench and Versa-Cart are available in 48”, and 60” tops, in a wide variety of models, with drawers and/or compartments to meet every requirement. Choose from colors of Industrial Black, Industrial Red, or Brown Wrinkle. Also, there is the Versa-Shop Series. Cabinets that can be customized for all your storage needs. The Versa Series is the Industry Solution for Aerospace, Construction, Energy, Fleet Maintenance, General Manufacturing, and Machine Shops. Kennedy, Industrial Grade, American Made, Since 1911. Contact Danco for more information on the Versa Series.
Click Here to download the Versa-Series Brochure.

FULLERTON TOOL - 3/6/2018 11:37:57 AM
The 1595 S-Drill is Fullerton's newest advanced performance coolant fed drill. This S-Drill has special polished flutes for better chip flow and comes with Fullerton's FC-7 coating. It’s self-centering, and has a double angle 120/135-deg point. The 1595 S-Drills are Dura Carb (Micrograin), right hand cut, right hand spiral. This is Fullerton's go to drill for stainless steels and steels and can also be used in cast iron, titanium, super alloys, and aluminum. This drill can increase your feed rates by up to 15% or higher. Available in metric and inch based tools with h6 shank diameter, and m7 cutter diameter tolerances. Contact Danco for more information about this drill 1-800-992-3233.

North American Tool - 2/19/2018 2:28:26 PM
North American Tool is a world class supplier of special taps, dies, and gages, who invests in the people, technology and processes to deliver high-quality specialized tools for all your needs. You can count on them as a worldwide industry leader of premium quality threading tool products. North American Tool is an ISO 9001:2008 registered manufacturer committed to creating top-quality cutting tools including special taps made of high speed steel (HSS), carbide, particle metal steel (PM) or high-speed steel ‘exotic’ (HSSE) to create the most durable cutting tool available so it can stand up to your demanding requirements. They offer a 24-Hour Shipment of Popular Special Taps and an 8-12 Day Shipment of Blueprint Special Taps from Bar Stock. Contact Danco today to get a quote on your special cutting tool requirements 1-800-992-3233.

WIKUS MARATHON M42 BLADE - 1/31/2018 2:09:41 PM
The MARATHON M42 is the ultimate economic band saw blade and stands for a broad application spectrum at a consistently high quality. Thanks to further development, the proven product characteristics have been optimized even more. MARATHON M42 also has a superior looking, shiny and smooth surface as a result of their Superfinishing. Applications include; medium-sized to large workpieces, all metals up to 1000 N/mm², profiles and solid materials single, layer and bundle cuts. With the increase blade-life, thanks to improved product characteristics, you’ll have less frequent blade changes thanks to the broad application spectrum. Also, lower operating noise due to the high running smoothness. It’s the all-purpose band saw blade. With the MARATHON M42 blade you’ll have significant cutting cost savings.
Click here to watch this blade in action.

GUHRING HT-800-WP Insert Modification - 1/12/2018 11:17:54 AM
Can’t find the drill size you’re looking for? Problem solved! Get the EXACT diameter you need in just two weeks! Guhring now has the capability to modify their standard HT-800 replaceable tip drill inserts by grinding down the diameters by as much as 0.20mm (.0079”), and recoating them with their original PVD coating. Thus allowing you an even more extensive range of sizes. The HT 800 drill bodies recommended for each insert size have sufficient clearance to accommodate for the maximum allowable insert diameter reduction, so there is no need to modify the body. Guhring’s comprehensive selection of drill body lengths – 1xD, 1.5xD, 3xD, 5xD, 7xD, and 10xD – paired with the flexibility of modifying the insert diameters provides a vast array of replaceable tip drill options. This modification service is provided through their manufacturing facility in Brookfield, WI. Note: 3pc minimum quantity per size. Contact Danco today for more information about this valuable program. 1-800-992-3233